Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump
| Shaft End Flow @ RPM: | 15.0 LB |
| Pressure Port Size, Cover End: | Flange Mount |
| Controlled Flow Rate: | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | 1 |
| Weight: | NPT |
| Minor Diameter [Min: | N/A |
| Shaft Seal Type: | 20 |
| Integral Valve Configuration: | 3 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Shaft End Flow @ RPM | 15.0 LB |
| Pressure Port Size, Cover End | Flange Mount |
| Controlled Flow Rate | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | 1 |
| Weight | NPT |
| Minor Diameter [Min | N/A |
| Shaft Seal Type | 20 |
| Integral Valve Configuration | 3 gpm @ 1200 rpm |
| Max. RPM [Max | 11 |
| Spline Description | 0.625 in |
| Shaft End RPM [Max | 9 Tooth Splined |
| Cover End RPM [Max | 4.5 gpm @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | V10 |
| Minor Diameter | 1 1/4 in |
| Manufacturer Part No. | SAE-8 |
| Relief Valve Setting | Buna-N |
| Cover End Pressure [Max | 4000 |
| Cover End Flow @ RPM | 2500 psi |
| Port Orientation - Cover End | 4 1/2 |
| Pressure Port Size, Shaft End | P |
| Shaft End Pressure [Max | SAE A, 2 Bolt |
| Major Diameter [Min | S |
| Minor Diameter [Max | 1 |
| Port Orientation - Shaft End | Inline w/Inlet |
| Major Diameter [Max | 0.6 |
| Mounting Flange | w/o Integral Valves |
| Shaft Code + Outlet Port Code | 11C |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump