Excavator Diesel Engine 6SD1 EX300-2/3 Water Pump 1-13610944-0 replace isuzu
| Minor Diameter [Min: | 118.0 LB |
| GPM @ 1,800 rpm, Shaft End: | 63 |
| Controlled Flow Rate: | Right Hand (CW) |
| Cover End Pressure [Max: | 2500 |
| Pressure Port Size, Shaft End: | 1 1/2 in Code 61 |
| Shaft Seal Type: | Flange |
| Pressure Port Size, Cover End: | 1 1/4 in Code 61 |
| Minor Diameter: | Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Min | 118.0 LB |
| GPM @ 1,800 rpm, Shaft End | 63 |
| Controlled Flow Rate | Right Hand (CW) |
| Cover End Pressure [Max | 2500 |
| Pressure Port Size, Shaft End | 1 1/2 in Code 61 |
| Shaft Seal Type | Flange |
| Pressure Port Size, Cover End | 1 1/4 in Code 61 |
| Minor Diameter | Standard Pilot |
| Weight | 1.56 in |
| Manufacturer Part No. | 4535V42A30-11AA22R |
| Minor Diameter [Max | 4535V |
| Spline Description | 2 7/16 in |
| Cover End Flow @ RPM | Buna-N |
| Max. RPM [Max | 1800 |
| Shaft End Pressure [Max | 2500 |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Port Orientation - Cover End | Outlet Opposite Inlet |
| Major Diameter [Min | 12/24 |
| Relief Valve Setting | N/A |
| Integral Valve Configuration | N/A |
| Major Diameter [Max | N/A |
| Shaft End Flow @ RPM | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Cover End RPM [Max | 1.25 in |
| Shaft End RPM [Max | 1.247 in |
| GPM @ 1,800 rpm, Cover End | 45 |
| Mounting Flange | 1.05 in |
| Displacement Cover End (cu in/revolution) | 5.9 |
| Displacement Shaft End (cu in/revolution) | 8.4 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump