Replacement Uchida Rexroth A8V107 Pilot Feed Gear Pump for Excavator
| Max. RPM [Max: | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End: | 31.5 |
| GPM @ 1,800 rpm, Cover End: | 16.5 |
| Pressure Port Size, Shaft End: | 1 in Flange |
| Pressure Port Size, Cover End: | 3/4 in Flange |
| Shaft End Flow @ RPM: | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight: | N/A |
| Relief Valve Setting: | N/A |
| PDF |
|
Product Details
| Max. RPM [Max | 45.0 LB |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| Pressure Port Size, Shaft End | 1 in Flange |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight | N/A |
| Relief Valve Setting | N/A |
| Cover End Flow @ RPM | 0.875 in |
| Minor Diameter [Min | 13 Tooth Splined |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Port Orientation - Cover End | Outlet 45° CCW from Inlet |
| Integral Valve Configuration | w/o Integral Valves |
| Cover End Pressure [Max | 3000 |
| Minor Diameter [Max | 0.715 in |
| Shaft End Pressure [Max | 3000 |
| Major Diameter [Max | Single Shaft Seal |
| Manufacturer Part No. | 2520VQ21A11-11BB20-LH |
| Mounting Flange | 2700 |
| Minor Diameter | 2500 |
| Controlled Flow Rate | N/A |
| Shaft Seal Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| Shaft End RPM [Max | 0.872 in |
| Major Diameter [Min | N/A |
| Cover End RPM [Max | N/A |
| Displacement Cover End (cu in/revolution) | 2.22 |
| Displacement Shaft End (cu in/revolution) | 4.12 |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump