PC60-7 Hydraulic Excavator 4D95 Engine Lubricating Oil Pump 6204-53-1100
| Max. RPM [Max: | 33.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Weight: | Left Hand (CCW) |
| Port Orientation - Cover End: | 25V17A-1C22L |
| Minor Diameter [Min: | 1 1/2 |
| Minor Diameter: | Flange |
| Cover End RPM [Max: | 3/16 in |
| Controlled Flow Rate: | 22 |
| PDF |
|
Product Details
| Max. RPM [Max | 33.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Weight | Left Hand (CCW) |
| Port Orientation - Cover End | 25V17A-1C22L |
| Minor Diameter [Min | 1 1/2 |
| Minor Diameter | Flange |
| Cover End RPM [Max | 3/16 in |
| Controlled Flow Rate | 22 |
| Minor Diameter [Max | 17 gpm @ 1200 rpm |
| Manufacturer Part No. | 0.875 in |
| Major Diameter [Max | Straight w/ Key |
| Mounting Flange | 25.5 gpm @ 1800 rpm |
| Pressure Port Size, Shaft End | 25V |
| Spline Description | 2.32 in |
| Shaft End Pressure [Max | None |
| Cover End Pressure [Max | 1 in Code 61 Flange |
| Shaft End Flow @ RPM | Buna-N |
| Pressure Port Size, Cover End | 1800 |
| Major Diameter [Min | 2500 psi |
| GPM @ 1,800 rpm, Cover End | 25 1/2 |
| Shaft Seal Type | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| Shaft End RPM [Max | Inline w/Inlet |
| Relief Valve Setting | 25V17A-1C22L |
| Port Orientation - Shaft End | 3.39 |
| Integral Valve Configuration | w/o Integral Valves |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump