3.15 Inch | 80 Millimeter x 3.252 Inch | 82.6 Millimeter x 3.5 Inch | 88.9 Millimeter NTN UCP216D1 Pillow Block Bearings
How do you find the 3.15 Inch | 80 Millimeter x 3.252 Inch | 82.6 Millimeter x 3.5 Inch | 88.9 Millimeter 3.15 Inch | 80 Millimeter x 3.252 Inch | 82.6 Millimeter x 3.5 Inch | 88.9 Millimeter NTN UCP216D1 Pillow Block Bearings specification? Manufacturers Online BEARING OF AMERICA CORP. Free 0.589 Weight 0.0 Inventory check！
What is UCP216D1 bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
UCP216D1 |
| Shaft End RPM [Max: |
101.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| Minor Diameter: |
4525VQ50A12-1AA20 |
| Major Diameter [Max: |
3 1/2 |
| Shaft Length: |
Flange |
| Shaft Type: |
5/16 in |
| Relief Valve Setting: |
Standard Pilot |
Product Details
| Shaft End RPM [Max |
101.0 LB |
| Max. RPM [Max |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| Minor Diameter |
4525VQ50A12-1AA20 |
| Major Diameter [Max |
3 1/2 |
| Shaft Length |
Flange |
| Shaft Type |
5/16 in |
| Relief Valve Setting |
Standard Pilot |
| Cover End RPM [Max |
1.25 in |
| Pump Series |
Straight w/ Key |
| Mounting |
4525VQ |
| Seal Material |
1.9375 in |
| Port Type |
Buna-N |
| Spline Description |
2200 |
| Controlled Flow Rate |
N/A |
| Rotation |
SAE C, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Model No. |
N/A |
| Major Diameter [Min |
2200 |
| Weight |
2200 |
| Cover End Flow @ RPM |
N/A |
| Shaft Key |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Minor Diameter [Min |
N/A |
| Shaft Seal Type |
N/A |
| Minor Diameter [Max |
N/A |
| Port Size |
N/A |
| Mounting Flange |
N/A |
| Displacement Shaft End (cu in/revolution) |
9.9 |
| Manufacturer Part No. |
4525VQ50A12-1AA20 |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
18 |
| GPM @ 1,800 rpm, Shaft End |
75 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
2.45 |