1.378 Inch | 35 Millimeter x 2.52 Inch | 64 Millimeter x 1.457 Inch | 37 Millimeter NTN DF0766LLUACS32/L627 Angular Contact Ball Bearings
With 1.197 Weight over 10170 full-service stores, our 1.378 Inch | 35 Millimeter x 2.52 Inch | 64 Millimeter x 1.457 Inch | 37 Millimeter NTN DF0766LLUACS32/L627 Angular Contact Ball Bearings inventory is extensive and our parts are priced right. DODGE Brand within 24 hours. This helps you maximize your productivity by saving time and your hard-earned BEARING OF AMERICA CORP. dollars. 1.378 Inch | 35 Millimeter x 2.52 Inch | 64 Millimeter x 1.457 Inch | 37 Millimeter
What is DF0766LLUACS32/L627 bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
DF0766LLUACS32/L627 |
| Cover End Flow @ RPM: |
45.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Shaft End RPM [Max: |
Left Hand (CCW) |
| Minor Diameter: |
2520VQ21A5-11BB20L |
| Displacement Shaft End (cu in/revolution): |
4.12 |
| Spline Description: |
Flange |
| Pump Series: |
N/A |
| Major Diameter [Min: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
45.0 LB |
| Max. RPM [Max |
Flange Mount |
| Shaft End RPM [Max |
Left Hand (CCW) |
| Minor Diameter |
2520VQ21A5-11BB20L |
| Displacement Shaft End (cu in/revolution) |
4.12 |
| Spline Description |
Flange |
| Pump Series |
N/A |
| Major Diameter [Min |
Standard Pilot |
| Shaft Type |
0.875 in |
| Mounting Flange |
13 Tooth Splined |
| Port Type |
2520VQ |
| Shaft Dia. |
1.375 in |
| Controlled Flow Rate |
Buna-N |
| Weight |
2500 |
| Cover End RPM [Max |
0.715 in |
| Seal Material |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Relief Valve Setting |
16/32 |
| Minor Diameter [Max |
2700 |
| Rotation |
2500 |
| Shaft Length |
N/A |
| Shaft Seal Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pilot Type |
0.873 in |
| Mounting |
0.872 in |
| Model No. |
N/A |
| Minor Diameter [Min |
N/A |
| Shaft Key |
N/A |
| Major Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ21A5-11BB20L |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
7.5 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |