0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205SCS26 Angular Contact Ball Bearings
NTN Bearing are a few 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter brands Flange Block Category you BEARING OF AMERICA CORP. will find in our inventory. Find 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205SCS26 Angular Contact Ball Bearings to see what's in 4 Number of Mounting Holes stock!
What is 5205SCS26 bearing cross reference？
| Brand Name: |
NTN |
| Model Number: |
5205SCS26 |
| Cover End RPM [Max: |
45.0 LB |
| Pilot Type: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
4.12 |
| Shaft Key: |
2 1/2 |
| Minor Diameter [Min: |
Flange |
| Spline Description: |
N/A |
| Mounting Flange: |
Standard Pilot |
Product Details
| Cover End RPM [Max |
45.0 LB |
| Pilot Type |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
4.12 |
| Shaft Key |
2 1/2 |
| Minor Diameter [Min |
Flange |
| Spline Description |
N/A |
| Mounting Flange |
Standard Pilot |
| Controlled Flow Rate |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Minor Diameter |
2520VQ |
| Shaft Type |
1.375 in |
| Relief Valve Setting |
Buna-N |
| Shaft End RPM [Max |
2500 |
| Model No. |
0.715 in |
| Port Type |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Port Size |
16/32 |
| Shaft Seal Type |
2700 |
| Seal Material |
2500 |
| Weight |
N/A |
| Minor Diameter [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Min |
0.873 in |
| Shaft Length |
0.872 in |
| Rotation |
N/A |
| Major Diameter [Max |
N/A |
| Pump Series |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ21A14-11CB20 |
| Cover End Pressure [Max |
2000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
21 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.8 |