@@@@@@@@ | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | C | B | U | d | C0 | s1 | C1 |
| 120FSH210 | Timken | 210 mm | 70 mm | - | - | 120 mm | - | - | - |
| 100NNU68210 | KOYO | 680 mm | 3810 kN | 210 mm | - | 500 mm | - | - | - |
| YSPAG 210 | SKF | 90 mm | 22 mm | - | - | 50 mm | - | - | - |
| YSPAG 210-115 | SKF | 90 mm | 22 mm | - | - | 49.212 mm | - | - | - |
| YTL 1210 | IKO | 16 mm | 7,47 kN | - | - | 12 | 11,8 kN | - | - |
| ZY-1210 | NSK | 18 mm | 8,3 kN | - | - | 12 | - | - | 10,5 mm |
| 140FS210 | Timken | 210 mm | 70 mm | - | - | 140 mm | - | - | - |
| 140FSF210 | NSK | 210 mm | 920 kN | 90 mm | 180 mm | 140 mm | - | - | - |
| F-210416 | INA | 21 mm | 18,7 mm | - | - | 15 mm | - | - | - |
| 11210 | Loyal | 90 mm | 22,9 kN | - | - | 50 mm | 8,15 kN | - | - |
| YET210 | SKF | 90 mm | 35,1 kN | 30,2 mm | - | 50 mm | 23,2 kN | 32,7 mm | - |
| SKF FYRP 2.1/2-18 Flange Block Bearings | Shaft End Flow @ RPM:45.0 LB; Mounting:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Port Orientation - Shaft End:2520VQ12A12-11CC20-LH; Model No.:2 1/2; Weight:Flange; Pressure Port Size, Shaft End:N/A; Pressure Port Size, Cover End:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF 6228 MA/C3 Single Row Ball Bearings | Minor Diameter [Max:45.0 LB; Minor Diameter [Min:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft End Flow @ RPM:2520VQ12A12-11CC20-LH; GPM @ 1,800 rpm, Cover End:2 1/2; Integral Valve Configuration:Flange; Mounting:N/A; Port Orientation - Cover End:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 35 mm x 80 mm x 21 mm SKF 21307 CC Spherical Roller Bearings | Pressure Port Size, Cover End:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Major Diameter [Max:Left Hand (CCW); Minor Diameter [Max:2520VQ12A12-11CC20-LH; Port Orientation - Shaft End:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Displacement Cover End (cu in/revolution):N/A; Mounting:Standard Pilot; Port Orientation - Cover End:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 50 mm x 110 mm x 44.4 mm SKF 3310 A-2RS1 Angular Contact Ball Bearings | Minor Diameter [Max:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Major Diameter [Min:Left Hand (CCW); Pressure Port Size, Shaft End:2520VQ12A12-11CC20-LH; Shaft End Pressure [Max:2 1/2; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Major Diameter [Max:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 2.559 Inch | 65 Millimeter x 3.937 Inch | 100 Millimeter x 1.417 Inch | 36 Millimeter SKF 7013 CD/P4ADBB Precision Ball Bearings | Integral Valve Configuration:45.0 LB; Rotation:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Major Diameter [Max:2520VQ12A12-11CC20-LH; Pressure Port Size, Cover End:2 1/2; Cover End Pressure [Max:Flange; Shaft End Flow @ RPM:N/A; Shaft End Pressure [Max:Standard Pilot; Mounting:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF W 6206-2RS1/VT378 Single Row Ball Bearings | Pressure Port Size, Shaft End:45.0 LB; Rotation:Flange Mount; Mounting:Left Hand (CCW); Cover End Pressure [Max:2520VQ12A12-11CC20-LH; Shaft End Pressure [Max:2 1/2; Relief Valve Setting:Flange; Port Orientation - Shaft End:N/A; Shaft End Flow @ RPM:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter SKF 5206CFFG Angular Contact Ball Bearings | Cover End Flow @ RPM:45.0 LB; Integral Valve Configuration:Flange Mount; Relief Valve Setting:Left Hand (CCW); Port Orientation - Shaft End:2520VQ12A12-11CC20-LH; Major Diameter [Min:2 1/2; Major Diameter [Max:Flange; Cover End Pressure [Max:N/A; Model No.:Standard Pilot; Port Orientation - Cover End:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF 6019/C4 Single Row Ball Bearings | Integral Valve Configuration:45.0 LB; Manufacturer Part No.:Flange Mount; Mounting:Left Hand (CCW); Minor Diameter [Max:2520VQ12A12-11CC20-LH; Major Diameter [Min:2 1/2; Shaft End Flow @ RPM:Flange; Port Orientation - Cover End:N/A; Port Orientation - Shaft End:Standard Pilot; Major Diameter [Max:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 3.937 Inch | 100 Millimeter x 5.906 Inch | 150 Millimeter x 1.89 Inch | 48 Millimeter SKF S7020 ACD/P4ADGA Precision Ball Bearings | Relief Valve Setting:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Mounting:2520VQ12A12-11CC20-LH; Displacement Shaft End (cu in/revolution):2 1/2; Integral Valve Configuration:Flange; Pressure Port Size, Shaft End:N/A; Port Orientation - Cover End:Standard Pilot; Manufacturer Part No.:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF W 639/2-2Z/R799 Single Row Ball Bearings | Cover End Pressure [Max:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft End Pressure [Max:2520VQ12A12-11CC20-LH; Port Orientation - Cover End:2 1/2; Minor Diameter [Min:Flange; Pressure Port Size, Shaft End:N/A; Pressure Port Size, Cover End:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF 6308-2RZ/C3LHT55 Single Row Ball Bearings | Pressure Port Size, Shaft End:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ12A12-11CC20-LH; Major Diameter [Max:2 1/2; Rotation:Flange; Port Orientation - Cover End:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Major Diameter [Min:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| SKF 618/8-2Z Single Row Ball Bearings | Rotation:45.0 LB; Manufacturer Part No.:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Port Orientation - Shaft End:2520VQ12A12-11CC20-LH; GPM @ 1,800 rpm, Cover End:2 1/2; Port Orientation - Cover End:Flange; Mounting:N/A; Cover End Flow @ RPM:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 80 mm x 4.528 Inch | 115 Millimeter x 8.5 mm SKF WS 81216 Thrust Roller Bearing | Minor Diameter [Min:45.0 LB; Cover End Flow @ RPM:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Weight:2520VQ12A12-11CC20-LH; Rotation:2 1/2; Relief Valve Setting:Flange; Minor Diameter [Max:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Port Orientation - Shaft End:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
| 4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 1.496 Inch | 38 Millimeter SKF 7222 CDGB/P4A Precision Ball Bearings | Pressure Port Size, Shaft End:45.0 LB; Model No.:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Minor Diameter [Min:2520VQ12A12-11CC20-LH; Rotation:2 1/2; Cover End Flow @ RPM:Flange; GPM @ 1,800 rpm, Shaft End:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Mounting:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ12A12-11CC20-LH; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.45; |
Bearings, units and housings
The application demands and operating conditions of rotating machinery are extremely diverse. To achieve the best performance fit for your application, there
Bearings, units and housings
SKF started with a bearing, and to this day is still a world leader in the design and manufacture of rolling and plain bearings. Here you will find our full assortment
Bearings, Seals, Lubrication, Mechatronics & Services | SKF
SKF is a leading bearing technology provider around rotating equipment since 1907 with experience in over 40 industries. Visit the SKF site to learn more about
SKF Group - Bearings and units Lubrication solutions
NEWS. 2018 January 17, 08:00. Hans Stråberg proposed as new Chairman of the Board of AB SKF. Colleen Repplier proposed as new Board Member
SKF Bearing Select - New
Please, use our new online bearing selection tool, SKF Bearing Select*. SKF Bearing Select will replace the SKF Bearing Calculator as well as the current
1.969 Inch | 50 Millimeter x 3.543 Inch | 90 Millimeter x 0.787 Inch | 20 Millimeter SKF NUP 210 ECNJ/C3 Cylindrical Roller Bearings Video