@@@@@@@@ | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | m | D | C | B | C0 | Noun | Size |
713618180 | FAG | - | - | - | - | - | - | - | - |
W 61818 | SKF | 90 mm | - | 115 mm | - | 13 mm | - | - | 115x90x13 |
W 61818-2RS1 | SKF | 90 mm | - | 115 mm | - | 13 mm | - | - | 115x90x13 |
W 61818-2Z | SKF | 90 mm | - | 115 mm | - | 13 mm | - | - | 115x90x13 |
S61818 | ZEN | 90 mm | - | 115 mm | 19 kN | 13 mm | 19,7 kN | - | 90x115x13 |
S61818-2RS | ZEN | 90 mm | - | 115 mm | 19 kN | 13 mm | 19,7 kN | - | 90x115x13 |
61818 | SIGMA | 90 mm | - | 115 mm | 13 mm | 13 mm | - | - | 90x115x13 |
61818 ZZ | ISO | 90 mm | - | 115 mm | 13 mm | 13 mm | - | - | 90x115x13 |
61818-2RS | ISO | 90 mm | - | 115 mm | 13 mm | 13 mm | - | - | 90x115x13 |
61818-2RS1 | SKF | 90 mm | - | 115 mm | - | 13 mm | - | Bearing | 115x90x13 |
61818-2RSR-Y | FAG | 90 mm | 0,28 kg / Weight | 115 mm | - | 13 mm | - | - | 90x115x13 |
65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Spline Description:Flange Mount; Rotation:Right Hand (CW); Minor Diameter [Min:V2010-1F11S6S-1CC12; Cover End RPM [Max:1 1/2; Pressure Port Size, Shaft End:Flange; Shaft End RPM [Max:3/16 in; Controlled Flow Rate:N/A; Mounting:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Minor Diameter [Min:Flange Mount; Spline Description:Right Hand (CW); Mounting:V2010-1F11S6S-1CC12; Weight:1 1/2; Port Orientation - Shaft End:Flange; Displacement Shaft End (cu in/revolution):3/16 in; Cover End RPM [Max:N/A; Model No.:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 6312-Z-C3 Single Row Ball Bearings | Manufacturer Part No.:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Cover End RPM [Max:V2010-1F11S6S-1CC12; Cover End Pressure [Max:1 1/2; Port Orientation - Shaft End:Flange; Shaft End Flow @ RPM:3/16 in; Shaft End RPM [Max:N/A; Integral Valve Configuration:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 6414-MA-C3 Single Row Ball Bearings | Shaft End RPM [Max:30.0 LB; Relief Valve Setting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Major Diameter [Min:V2010-1F11S6S-1CC12; GPM @ 1,800 rpm, Cover End:1 1/2; Mounting:Flange; Weight:3/16 in; Mounting Flange:N/A; Model No.:0.875 in; Cover End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 6316-P6-C3 Precision Ball Bearings | GPM @ 1,800 rpm, Shaft End:30.0 LB; Cover End Pressure [Max:Flange Mount; Mounting:Right Hand (CW); Spline Description:V2010-1F11S6S-1CC12; Shaft End RPM [Max:1 1/2; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Max:3/16 in; Shaft End Pressure [Max:N/A; Major Diameter [Min:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 6307-TB-P63 Precision Ball Bearings | Major Diameter [Max:30.0 LB; Shaft End RPM [Max:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Port Size:V2010-1F11S6S-1CC12; Pressure Port Size, Cover End:1 1/2; Port Orientation - Shaft End:Flange; Shaft End Flow @ RPM:3/16 in; Rotation:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings | Shaft End RPM [Max:30.0 LB; Shaft End Pressure [Max:Flange Mount; Minor Diameter [Max:Right Hand (CW); Cover End Pressure [Max:V2010-1F11S6S-1CC12; Displacement Cover End (cu in/revolution):1 1/2; Controlled Flow Rate:Flange; Pressure Port Size, Cover End:3/16 in; Spline Description:N/A; Pressure Port Size, Shaft End:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG N214-E-TVP2-C3 Cylindrical Roller Bearings | Shaft End Flow @ RPM:30.0 LB; Shaft End RPM [Max:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Major Diameter [Min:V2010-1F11S6S-1CC12; Cover End RPM [Max:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Minor Diameter [Max:3/16 in; Model No.:N/A; Mounting Flange:0.875 in; Minor Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 7920.ETP4SUL Precision Ball Bearings | Shaft End Pressure [Max:30.0 LB; Major Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Orientation - Cover End:V2010-1F11S6S-1CC12; Cover End RPM [Max:1 1/2; Minor Diameter [Min:Flange; Model No.:3/16 in; Displacement Cover End (cu in/revolution):N/A; Manufacturer Part No.:0.875 in; Weight:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 6009-MA-C3 Single Row Ball Bearings | Model No.:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Integral Valve Configuration:Right Hand (CW); Port Orientation - Cover End:V2010-1F11S6S-1CC12; Shaft End RPM [Max:1 1/2; Mounting Flange:Flange; Shaft End Pressure [Max:3/16 in; Cover End Flow @ RPM:N/A; Pressure Port Size, Shaft End:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG B7216-E-T-P4S-UM Precision Ball Bearings | Cover End RPM [Max:30.0 LB; Integral Valve Configuration:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Seal Type:V2010-1F11S6S-1CC12; Manufacturer Part No.:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Minor Diameter [Min:N/A; Pressure Port Size, Shaft End:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
Timken lm102910 Bearing | Shaft End RPM [Max:30.0 LB; Mounting Flange:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Shaft Seal Type:V2010-1F11S6S-1CC12; Pressure Port Size, Cover End:1 1/2; Major Diameter [Min:Flange; Displacement Cover End (cu in/revolution):3/16 in; Model No.:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 718/560-MP Angular Contact Ball Bearings | Cover End Pressure [Max:30.0 LB; Cover End RPM [Max:Flange Mount; Spline Description:Right Hand (CW); Mounting:V2010-1F11S6S-1CC12; Port Orientation - Shaft End:1 1/2; Shaft End Pressure [Max:Flange; Major Diameter [Max:3/16 in; Pressure Port Size, Cover End:N/A; Pressure Port Size, Shaft End:0.875 in; Shaft Seal Type:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
FAG 239/600-B-K-MB-T52BW Spherical Roller Bearings | Minor Diameter [Max:30.0 LB; Cover End Flow @ RPM:Flange Mount; Spline Description:Right Hand (CW); Shaft Seal Type:V2010-1F11S6S-1CC12; Relief Valve Setting:1 1/2; Major Diameter [Min:Flange; Weight:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Mounting:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-1CC12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22; |
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
90 mm x 115 mm x 13 mm FAG 61818-Y Single Row Ball Bearings Video