@@@@@@@@ | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | e | r | m | C | H | B | R | T |
| VKHB 2215 | SKF | - | - | - | - | - | - | - | - |
| 22215EAKW33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 22215EAW33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 22215EG15KW33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 22215EG15W33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 22215EMKW33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 22215EMW33 | SNR | - | - | - | - | 31,000 mm | - | - | - |
| 17BTM2215 | KOYO | - | - | - | 6,15 kN | - | - | - | - |
| WS22215-E1-2RSR | FAG | 0,22 | - | 2,2 kg / Weight | - | - | 38 mm | - | - |
| XFA32215/Y32215 | Timken | - | 1,5 mm | - | 27 mm | - | 31 mm | 0,5 mm | 33,25 mm |
| XFA32215/YSA32215R | Timken | - | 1,5 mm | - | 27 mm | - | 31 mm | 0,5 mm | 11,75 mm |
| FAG 6316-P6-C3 Precision Ball Bearings | Shaft End RPM [Max:35.0 LB; Rotation:Flange Mount; Model No.:Right Hand (CW); Shaft End Pressure [Max:V2020-1F9S7S-11DD30; Port Orientation - Cover End:2; Manufacturer Part No.:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft End Flow @ RPM:N/A; Weight:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG B7216-E-T-P4S-UM Precision Ball Bearings | Displacement Shaft End (cu in/revolution):35.0 LB; Mounting Flange:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Port Orientation - Cover End:V2020-1F9S7S-11DD30; Minor Diameter [Max:2; Cover End Flow @ RPM:Flange; Major Diameter [Min:N/A; Weight:N/A; Major Diameter [Max:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| 65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball Bearings | Spline Description:35.0 LB; Cover End Pressure [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Minor Diameter [Max:V2020-1F9S7S-11DD30; Rotation:2; Cover End Flow @ RPM:Flange; GPM @ 1,800 rpm, Cover End:N/A; Port Size:N/A; Mounting:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 6307-TB-P63 Precision Ball Bearings | GPM @ 1,800 rpm, Cover End:35.0 LB; Shaft End Flow @ RPM:Flange Mount; Integral Valve Configuration:Right Hand (CW); Manufacturer Part No.:V2020-1F9S7S-11DD30; Port Size:2; Cover End Pressure [Max:Flange; Cover End RPM [Max:N/A; Mounting:N/A; Minor Diameter [Min:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 718/560-MP Angular Contact Ball Bearings | Pressure Port Size, Shaft End:35.0 LB; Integral Valve Configuration:Flange Mount; Weight:Right Hand (CW); Shaft Seal Type:V2020-1F9S7S-11DD30; Mounting:2; Minor Diameter [Min:Flange; Relief Valve Setting:N/A; Displacement Cover End (cu in/revolution):N/A; Cover End Pressure [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG N214-E-TVP2-C3 Cylindrical Roller Bearings | Spline Description:35.0 LB; Port Orientation - Cover End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Relief Valve Setting:V2020-1F9S7S-11DD30; Port Orientation - Shaft End:2; Pressure Port Size, Cover End:Flange; Major Diameter [Min:N/A; Displacement Shaft End (cu in/revolution):N/A; Displacement Cover End (cu in/revolution):0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 6009-MA-C3 Single Row Ball Bearings | Minor Diameter [Max:35.0 LB; Integral Valve Configuration:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Orientation - Cover End:V2020-1F9S7S-11DD30; Pressure Port Size, Cover End:2; Displacement Cover End (cu in/revolution):Flange; Shaft Seal Type:N/A; Minor Diameter [Min:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 7920.ETP4SUL Precision Ball Bearings | Displacement Cover End (cu in/revolution):35.0 LB; Cover End RPM [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Controlled Flow Rate:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2; Port Orientation - Shaft End:Flange; Shaft End RPM [Max:N/A; Shaft End Pressure [Max:N/A; Mounting:0.875 in; Weight:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings | Controlled Flow Rate:35.0 LB; Spline Description:Flange Mount; Weight:Right Hand (CW); Displacement Cover End (cu in/revolution):V2020-1F9S7S-11DD30; Shaft Seal Type:2; Cover End Flow @ RPM:Flange; Cover End RPM [Max:N/A; Integral Valve Configuration:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 6414-MA-C3 Single Row Ball Bearings | Mounting Flange:35.0 LB; Minor Diameter [Min:Flange Mount; Port Size:Right Hand (CW); Port Orientation - Cover End:V2020-1F9S7S-11DD30; Mounting:2; Shaft End RPM [Max:Flange; Pressure Port Size, Shaft End:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Pressure Port Size, Cover End:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| Timken lm102910 Bearing | Spline Description:35.0 LB; Rotation:Flange Mount; Minor Diameter [Max:Right Hand (CW); Major Diameter [Min:V2020-1F9S7S-11DD30; Shaft End Pressure [Max:2; Integral Valve Configuration:Flange; Weight:N/A; Port Size:N/A; Displacement Shaft End (cu in/revolution):0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 6312-Z-C3 Single Row Ball Bearings | Spline Description:35.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Port Orientation - Cover End:Right Hand (CW); Cover End Pressure [Max:V2020-1F9S7S-11DD30; GPM @ 1,800 rpm, Cover End:2; Weight:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Pressure Port Size, Cover End:N/A; Model No.:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| 100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings | Mounting Flange:35.0 LB; Major Diameter [Max:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Shaft Seal Type:V2020-1F9S7S-11DD30; Minor Diameter [Min:2; Pressure Port Size, Cover End:Flange; GPM @ 1,800 rpm, Cover End:N/A; Shaft End Pressure [Max:N/A; Cover End RPM [Max:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
| FAG 239/600-B-K-MB-T52BW Spherical Roller Bearings | Port Orientation - Shaft End:35.0 LB; Mounting Flange:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Cover End Pressure [Max:V2020-1F9S7S-11DD30; Weight:2; Integral Valve Configuration:Flange; Minor Diameter [Min:N/A; Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F9S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.81; |
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
FAG NUP2215-E-M1A-C3 Cylindrical Roller Bearings Video