@@@@@@@@ | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | D | b | a | L | B | W | d | C |
RW357004 | KBC | 35 mm | - | - | 95 mm | - | 38.894 mm | 18 mm | - |
7004 | Ruville | - | - | - | - | - | - | - | - |
RB 70045 | ISB | 815 mm | 3 mm | 6 mm | - | 45 mm | - | 700 mm | 281 kN |
SM7004CP5 | KBC | 42 mm | - | 10.2 mm | - | 12 mm | - | 20 mm | 18 kN |
CRBC 70045 | IKO | 600 mm | - | - | - | 40 mm | - | 500 mm | 212 kN |
CRB 70045 | IKO | 600 mm | - | - | - | 40 mm | - | 500 mm | 259 kN |
4R17004 | NTN | 1180,000 mm | - | - | - | 650,000 mm | - | 850,000 mm | 650,000 mm |
S7004 CE/P4A | SKF | 42 mm | - | 10.2 mm | - | 12 mm | - | 20 mm | - |
S7004 ACD/HCP4A | SKF | 42 mm | - | 13.3 mm | - | 12 mm | - | 20 mm | - |
S7004 ACD/P4A | SKF | 42 mm | - | 13.3 mm | - | 12 mm | - | 20 mm | - |
S7004 ACE/HCP4A | SKF | 42 mm | - | 13.2 mm | - | 12 mm | - | 20 mm | - |
100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings | GPM @ 1,800 rpm, Shaft End:30.0 LB; Port Size:Flange Mount; Weight:Left Hand (CCW); Major Diameter [Min:V2010-1F12B2B-1AA12-LH; Integral Valve Configuration:1 1/2; Mounting:Flange; Shaft End Flow @ RPM:3/16 in; Shaft End RPM [Max:N/A; Manufacturer Part No.:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 239/600-B-K-MB-T52BW Spherical Roller Bearings | Manufacturer Part No.:30.0 LB; Shaft End RPM [Max:Flange Mount; Spline Description:Left Hand (CCW); GPM @ 1,800 rpm, Shaft End:V2010-1F12B2B-1AA12-LH; Port Orientation - Cover End:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Shaft End Pressure [Max:3/16 in; Pressure Port Size, Shaft End:N/A; Port Size:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 6312-Z-C3 Single Row Ball Bearings | Displacement Cover End (cu in/revolution):30.0 LB; Port Size:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft End Pressure [Max:V2010-1F12B2B-1AA12-LH; Integral Valve Configuration:1 1/2; Controlled Flow Rate:Flange; Rotation:3/16 in; Port Orientation - Shaft End:N/A; Cover End Pressure [Max:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 6414-MA-C3 Single Row Ball Bearings | Pressure Port Size, Cover End:30.0 LB; Manufacturer Part No.:Flange Mount; Shaft Seal Type:Left Hand (CCW); Cover End Pressure [Max:V2010-1F12B2B-1AA12-LH; Cover End Flow @ RPM:1 1/2; Mounting Flange:Flange; Major Diameter [Max:3/16 in; Port Orientation - Cover End:N/A; Weight:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 6009-MA-C3 Single Row Ball Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Manufacturer Part No.:Flange Mount; Spline Description:Left Hand (CCW); Rotation:V2010-1F12B2B-1AA12-LH; Controlled Flow Rate:1 1/2; Cover End Flow @ RPM:Flange; Cover End Pressure [Max:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter [Max:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 7920.ETP4SUL Precision Ball Bearings | Pressure Port Size, Shaft End:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Seal Type:Left Hand (CCW); Cover End Flow @ RPM:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:1 1/2; Minor Diameter [Max:Flange; Shaft End RPM [Max:3/16 in; Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG N214-E-TVP2-C3 Cylindrical Roller Bearings | Integral Valve Configuration:30.0 LB; Controlled Flow Rate:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft End Flow @ RPM:V2010-1F12B2B-1AA12-LH; GPM @ 1,800 rpm, Cover End:1 1/2; Major Diameter [Min:Flange; Shaft Seal Type:3/16 in; Displacement Cover End (cu in/revolution):N/A; Relief Valve Setting:0.875 in; Port Size:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball Bearings | Cover End Pressure [Max:30.0 LB; Rotation:Flange Mount; Model No.:Left Hand (CCW); Port Orientation - Shaft End:V2010-1F12B2B-1AA12-LH; Controlled Flow Rate:1 1/2; Major Diameter [Max:Flange; Integral Valve Configuration:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Mounting:0.875 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG B7216-E-T-P4S-UM Precision Ball Bearings | Displacement Shaft End (cu in/revolution):30.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Major Diameter [Max:V2010-1F12B2B-1AA12-LH; Major Diameter [Min:1 1/2; Port Size:Flange; Shaft End RPM [Max:3/16 in; Pressure Port Size, Shaft End:N/A; Mounting:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 6316-P6-C3 Precision Ball Bearings | GPM @ 1,800 rpm, Shaft End:30.0 LB; Spline Description:Flange Mount; Relief Valve Setting:Left Hand (CCW); Port Orientation - Shaft End:V2010-1F12B2B-1AA12-LH; Integral Valve Configuration:1 1/2; Manufacturer Part No.:Flange; Displacement Cover End (cu in/revolution):3/16 in; Cover End Flow @ RPM:N/A; Shaft End RPM [Max:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
Timken lm102910 Bearing | Manufacturer Part No.:30.0 LB; Weight:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Shaft End RPM [Max:V2010-1F12B2B-1AA12-LH; Major Diameter [Min:1 1/2; Controlled Flow Rate:Flange; GPM @ 1,800 rpm, Cover End:3/16 in; Mounting:N/A; Cover End Flow @ RPM:0.875 in; Spline Description:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 6307-TB-P63 Precision Ball Bearings | Spline Description:30.0 LB; Manufacturer Part No.:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Major Diameter [Max:V2010-1F12B2B-1AA12-LH; Shaft End RPM [Max:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Cover End Flow @ RPM:3/16 in; Pressure Port Size, Cover End:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 718/560-MP Angular Contact Ball Bearings | Shaft End RPM [Max:30.0 LB; Weight:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Minor Diameter [Max:1 1/2; Port Orientation - Cover End:Flange; Shaft Seal Type:3/16 in; Spline Description:N/A; Shaft End Pressure [Max:0.875 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings | Pressure Port Size, Cover End:30.0 LB; Manufacturer Part No.:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Weight:V2010-1F12B2B-1AA12-LH; GPM @ 1,800 rpm, Shaft End:1 1/2; Relief Valve Setting:Flange; Major Diameter [Max:3/16 in; GPM @ 1,800 rpm, Cover End:N/A; Spline Description:0.875 in; Major Diameter [Min:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12B2B-1AA12-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
INA/FAG Industrial Bearings from National Precision Bearing
INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball
FAG (Schaeffler) - Motion Industries
Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the
FAG Bearings | E.B. Atmus Co., Inc
FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany
Products / Services | Bearing ... - Schaeffler North America
FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing
Deep groove ball bearing by FAG | Schaeffler Germany
FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads
FAG B7004-E-2RSD-T-P4S-DUM Precision Ball Bearings Video