China Hydstar Brand Hydraulic Oil Filter Element 322-3155 Replace CAT
| Mounting: | 45.0 LB |
| Port Type: | Flange Mount |
| Displacement Shaft End (cu in/revolution): | 4.12 |
| Relief Valve Setting: | N/A |
| Pressure Port Size, Shaft End: | 1 in Flange |
| GPM @ 1,800 rpm, Cover End: | 7.5 |
| Shaft Type: | N/A |
| Cover End Pressure [Max: | 3000 |
| PDF |
|
Product Details
| Mounting | 45.0 LB |
| Port Type | Flange Mount |
| Displacement Shaft End (cu in/revolution) | 4.12 |
| Relief Valve Setting | N/A |
| Pressure Port Size, Shaft End | 1 in Flange |
| GPM @ 1,800 rpm, Cover End | 7.5 |
| Shaft Type | N/A |
| Cover End Pressure [Max | 3000 |
| Weight | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| Rotation | 2520VQ |
| Port Size | 1.375 in |
| Shaft Key | Buna-N |
| Manufacturer Part No. | 2520VQ21A5-11BB20L |
| Integral Valve Configuration | w/o Integral Valves |
| Pilot Type | SAE B, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
| Shaft End Pressure [Max | 3000 |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Model No. | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.1 |
| Minor Diameter [Min | N/A |
| Port Orientation - Cover End | Outlet 45° CCW from Inlet |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump