6754711012 Diesel Fuel Injection Pump for PC240-8 PC200-8
Controlled Flow Rate: | 30.0 LB |
GPM @ 1,800 rpm, Shaft End: | Flange Mount |
Shaft End Pressure [Max: | Right Hand (CW) |
Minor Diameter: | V2010-1F11S3S-11CC12 |
Cover End RPM [Max: | 1.5 |
Displacement Shaft End (cu in/revolution): | 2.2 |
Cover End Pressure [Max: | N/A |
Rotation: | N/A |
PDF |
|
Product Details
Controlled Flow Rate | 30.0 LB |
GPM @ 1,800 rpm, Shaft End | Flange Mount |
Shaft End Pressure [Max | Right Hand (CW) |
Minor Diameter | V2010-1F11S3S-11CC12 |
Cover End RPM [Max | 1.5 |
Displacement Shaft End (cu in/revolution) | 2.2 |
Cover End Pressure [Max | N/A |
Rotation | N/A |
Port Orientation - Shaft End | Outlet Inline w/Inlet |
Port Size | 13 Tooth Splined |
Shaft Seal Type | V2010 |
Shaft Length | 1.3125 in |
Weight | Double |
Minor Diameter [Min | Buna-N |
Shaft Key | 2500 |
Pilot Type | 0.728 in |
Cover End Flow @ RPM | SAE B, 2 Bolt |
Max. RPM [Max | Single Shaft Seal |
Pressure Port Size, Cover End | 1/2 in SAE O-Ring |
Minor Diameter [Max | 3000 |
Displacement Cover End (cu in/revolution) | 0.6 |
Mounting | N/A |
Shaft Dia. | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 0.873 in |
Seal Material | 0.872 in |
Shaft End RPM [Max | 0.734 in |
Major Diameter [Min | 0.723 in |
Model No. | N/A |
Mounting Flange | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Integral Valve Configuration | V2010-1F11S3S-11CC12 |
Port Type | 2500 |
Port Orientation - Cover End | Outlet 45° CW from Inlet |
Pressure Port Size, Shaft End | 3/4 in SAE O-Ring |
Major Diameter [Max | 16.5 |
Spline Description | N/A |