C9 Diesel Engine piston 197-9297 /324-7380 For Excavator 330C Parts
Shaft End Flow @ RPM: | 76.0 LB |
Mounting: | Flange Mount |
Relief Valve Setting: | Left Hand (CCW) |
Shaft End Pressure [Max: | 3000 |
Seal Material: | 3 |
Port Orientation - Cover End: | Outlet 45° CW from Inlet |
Shaft Seal Type: | N/A |
Major Diameter [Min: | Standard Pilot |
PDF |
|
Product Details
Shaft End Flow @ RPM | 76.0 LB |
Mounting | Flange Mount |
Relief Valve Setting | Left Hand (CCW) |
Shaft End Pressure [Max | 3000 |
Seal Material | 3 |
Port Orientation - Cover End | Outlet 45° CW from Inlet |
Shaft Seal Type | N/A |
Major Diameter [Min | Standard Pilot |
Rotation | 1.25 in |
Cover End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
Manufacturer Part No. | 1.9375 in |
Model No. | Double |
Weight | Buna-N |
Shaft Length | 2500 |
Minor Diameter [Min | 1.04 in |
Mounting Flange | SAE C, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
GPM @ 1,800 rpm, Shaft End | 45 |
Pump Series | 2500 |
Minor Diameter [Max | 2500 |
Shaft End RPM [Max | N/A |
Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max | 1.248 in |
Max. RPM [Max | 1.247 in |
Spline Description | N/A |
Cover End RPM [Max | N/A |
Displacement Shaft End (cu in/revolution) | 6 |
Cover End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Shaft End | Outlet 90° CW from Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.1 |