Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
Spline Description: | 45.0 LB |
Max. RPM [Max: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Weight: | 2520VQ14A5-1CC20 |
GPM @ 1,800 rpm, Shaft End: | 2.5 |
Integral Valve Configuration: | Flange |
Port Orientation - Cover End: | 3/16 in |
Port Type: | Standard Pilot |
PDF |
|
Product Details
Spline Description | 45.0 LB |
Max. RPM [Max | Flange Mount |
Shaft Length | Right Hand (CW) |
Weight | 2520VQ14A5-1CC20 |
GPM @ 1,800 rpm, Shaft End | 2.5 |
Integral Valve Configuration | Flange |
Port Orientation - Cover End | 3/16 in |
Port Type | Standard Pilot |
Minor Diameter | 0.875 in |
Controlled Flow Rate | Straight w/ Key |
Shaft Key | 2520VQ |
Mounting | 1.9375 in |
Cover End Pressure [Max | Double |
Shaft Dia. | Buna-N |
Minor Diameter [Max | 2700 |
Manufacturer Part No. | N/A |
Shaft End Pressure [Max | SAE B, 2 Bolt |
Seal Material | Single Shaft Seal |
Major Diameter [Max | N/A |
Shaft Seal Type | 2700 |
Cover End Flow @ RPM | 2700 |
Rotation | N/A |
Cover End RPM [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Orientation - Shaft End | Outlet Inline w/Inlet |
Port Size | N/A |
Mounting Flange | N/A |
Model No. | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Shaft End Flow @ RPM | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Pump Series | 2520VQ14A5-1CC20 |
Relief Valve Setting | 3000 |
Shaft Type | 3000 |
Major Diameter [Min | 7.5 |
Minor Diameter [Min | 21 |
Shaft End RPM [Max | w/o Integral Valves |
Pilot Type | Outlet 45° CW from Inlet |
Pressure Port Size, Cover End | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.1 |
Displacement Shaft End (cu in/revolution) | 2.8 |