Heavy Equipment Spare Parts for CAT E200B MS180 Hydraulic Pump
GPM @ 1,800 rpm, Shaft End: | 35.0 LB |
Cover End RPM [Max: | Flange Mount |
Rotation: | Left Hand (CCW) |
Shaft Type: | V2020-1F7S6S-11AA30-LH |
Minor Diameter [Min: | 2 |
Major Diameter [Max: | Flange |
Shaft Key: | N/A |
Max. RPM [Max: | N/A |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 35.0 LB |
Cover End RPM [Max | Flange Mount |
Rotation | Left Hand (CCW) |
Shaft Type | V2020-1F7S6S-11AA30-LH |
Minor Diameter [Min | 2 |
Major Diameter [Max | Flange |
Shaft Key | N/A |
Max. RPM [Max | N/A |
Integral Valve Configuration | 0.875 in |
Spline Description | 13 Tooth Splined |
Relief Valve Setting | V2020 |
Manufacturer Part No. | 1 5/16 in |
Pilot Type | Buna-N |
Pump Series | 3000 |
Port Orientation - Cover End | 0.728 in |
Shaft End RPM [Max | SAE B, 2 Bolt |
Major Diameter [Min | Single Shaft Seal |
Shaft Dia. | 16/32 |
Seal Material | 3000 |
Cover End Pressure [Max | 3000 |
Mounting Flange | N/A |
Mounting | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Shaft Length | 0.873 in |
Weight | 0.872 in |
Shaft End Flow @ RPM | 0.7335 in |
Port Orientation - Shaft End | 0.7225 in |
Port Type | N/A |
Shaft End Pressure [Max | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Controlled Flow Rate | V2020-1F7S6S-11AA30-LH |
Cover End Flow @ RPM | 2500 |
Shaft Seal Type | 2500 |
Port Size | 9 |
Minor Diameter [Max | 10.5 |
Model No. | N/A |
GPM @ 1,800 rpm, Cover End | Outlet Opposite Inlet |
Minor Diameter | Outlet Opposite Inlet |
Pressure Port Size, Cover End | 3/4 in SAE O-Ring |
Pressure Port Size, Shaft End | 3/4 in SAE O-Ring |
Displacement Cover End (cu in/revolution) | 1.19 |
Displacement Shaft End (cu in/revolution) | 1.39 |