Excavator CAT 330C Kit Arm Oil Cylinder Seal Kits 1915649 for Caterpillar
| Port Type: |
35.0 LB |
| Pressure Port Size, Shaft End: |
3/4 in SAE O-Ring |
| Pilot Type: |
Left Hand (CCW) |
| Integral Valve Configuration: |
N/A |
| Displacement Shaft End (cu in/revolution): |
1.4 |
| Shaft Length: |
Flange |
| Weight: |
N/A |
| Shaft Dia.: |
N/A |
| PDF |
|
Product Details
| Port Type |
35.0 LB |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Pilot Type |
Left Hand (CCW) |
| Integral Valve Configuration |
N/A |
| Displacement Shaft End (cu in/revolution) |
1.4 |
| Shaft Length |
Flange |
| Weight |
N/A |
| Shaft Dia. |
N/A |
| Model No. |
0.875 in |
| Pressure Port Size, Cover End |
3/4 in SAE O-Ring |
| Shaft Type |
V2020 |
| Port Orientation - Cover End |
Outlet Inline w/Inlet |
| Pump Series |
Double |
| Shaft Key |
Buna-N |
| Port Size |
3000 |
| GPM @ 1,800 rpm, Cover End |
10.5 |
| Mounting |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
10.5 |
| Displacement Cover End (cu in/revolution) |
1.4 |
| Rotation |
2500 |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Minor Diameter [Max |
0.734 in |
| Minor Diameter [Min |
0.723 in |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
V2020-1F7S7S-11CC30-LH |
| Cover End Pressure [Max |
2500 |
| Shaft End Pressure [Max |
2500 |