Hydraulic Gear Pump Tandem Pump 07400-40500 for Bulldozer D60
Major Diameter [Max: |
30.0 LB |
Seal Material: |
Flange Mount |
Major Diameter [Min: |
Left Hand (CCW) |
Mounting Flange: |
V2010-1F11B5B-1AA12-LH |
Model No.: |
1 1/2 |
Pressure Port Size, Shaft End: |
3/4 in SAE O-Ring |
Shaft End Flow @ RPM: |
3/16 in |
Relief Valve Setting: |
N/A |
PDF |
|
Product Details
Major Diameter [Max |
30.0 LB |
Seal Material |
Flange Mount |
Major Diameter [Min |
Left Hand (CCW) |
Mounting Flange |
V2010-1F11B5B-1AA12-LH |
Model No. |
1 1/2 |
Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
Shaft End Flow @ RPM |
3/16 in |
Relief Valve Setting |
N/A |
Port Type |
0.875 in |
Shaft Dia. |
Straight w/ Key |
Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
Shaft End RPM [Max |
Buna-N |
Weight |
2500 |
Spline Description |
N/A |
Cover End Flow @ RPM |
SAE B, 2 Bolt |
Minor Diameter |
Single Shaft Seal |
GPM @ 1,800 rpm, Cover End |
N/A |
GPM @ 1,800 rpm, Shaft End |
3000 |
Cover End RPM [Max |
2500 |
Rotation |
N/A |
Port Size |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Orientation - Shaft End |
Outlet Opposite Inlet |
Controlled Flow Rate |
N/A |
Shaft Seal Type |
N/A |
Max. RPM [Max |
N/A |
Shaft Type |
N/A |
Minor Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Pump Series |
V2010-1F11B5B-1AA12-LH |
Shaft Length |
2500 |
Integral Valve Configuration |
N/A |
Minor Diameter [Min |
7.5 |
Mounting |
16.5 |
Displacement Cover End (cu in/revolution) |
1 |
Displacement Shaft End (cu in/revolution) |
2.22 |