CAT Excavator 320C S6K Engine Piston Kit 297-7795 With 102mm
| Shaft End RPM [Max: |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Port Type: |
Left Hand (CCW) |
| Integral Valve Configuration: |
w/o Integral Valves |
| Controlled Flow Rate: |
3 |
| Seal Material: |
Flange |
| Major Diameter [Max: |
N/A |
| Max. RPM [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft End RPM [Max |
76.0 LB |
| Shaft Length |
Flange Mount |
| Port Type |
Left Hand (CCW) |
| Integral Valve Configuration |
w/o Integral Valves |
| Controlled Flow Rate |
3 |
| Seal Material |
Flange |
| Major Diameter [Max |
N/A |
| Max. RPM [Max |
Standard Pilot |
| Cover End RPM [Max |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
3525VQ |
| Minor Diameter |
1.9375 in |
| Model No. |
Buna-N |
| Mounting Flange |
2400 |
| Spline Description |
1.04 in |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Weight |
2400 |
| Rotation |
N/A |
| Pressure Port Size, Cover End |
1 in Flange |
| Relief Valve Setting |
1.248 in |
| Cover End Flow @ RPM |
1.247 in |
| Pump Series |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Minor Diameter [Min |
N/A |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Shaft Dia. |
3525VQ38A17-11CC20-LH |
| Minor Diameter [Max |
3000 |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Mounting |
25.5 |
| Port Size |
57 |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Displacement Shaft End (cu in/revolution) |
7.42 |