7S4629 Hydraulic Gear Oil Pump for Caterpillar 950B Transmission Pump
| Weight: |
15.0 LB |
| Pilot Type: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Pump Series: |
SAE-16 |
| Pressure Port Size, Cover End: |
SAE |
| Shaft Dia.: |
N/A |
| Shaft Type: |
20 |
| Model No.: |
7 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Weight |
15.0 LB |
| Pilot Type |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Pump Series |
SAE-16 |
| Pressure Port Size, Cover End |
SAE |
| Shaft Dia. |
N/A |
| Shaft Type |
20 |
| Model No. |
7 gpm @ 1200 rpm |
| Rotation |
0.73 in |
| Mounting |
11 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
10.5 gpm @ 1800 rpm |
| Pressure Port Size, Shaft End |
V10 |
| Port Size |
1 1/4 in |
| Displacement Shaft End (cu in/revolution) |
SAE-8 |
| Shaft Key |
Buna-N |
| Shaft Length |
2800 |
| Pressure [Max |
2000 psi |
| GPM @ 1,800 rpm |
10 1/2 |
| Inlet Port Code |
S |
| Mounting Flange |
SAE A, 2 Bolt |
| Pressure Port Code |
T |
| Mounting Flange Code |
1 |
| Outlet Port Position |
90° CCW from Inlet |
| Displacement (in³/rev) |
1.39 |
| Integral Valve Flow Rate |
5 gal/min |
| Integral Valve Configuration |
Flow Control & Relief |
| Integral Valve Relief Setting |
2000 psi |
| Shaft Code + Outlet Port Code |
38B |