6754711012 Diesel Fuel Injection Pump for PC240-8 PC200-8
| Controlled Flow Rate: |
30.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Minor Diameter: |
V2010-1F11S3S-11CC12 |
| Cover End RPM [Max: |
1.5 |
| Displacement Shaft End (cu in/revolution): |
2.2 |
| Cover End Pressure [Max: |
N/A |
| Rotation: |
N/A |
| PDF |
|
Product Details
| Controlled Flow Rate |
30.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Minor Diameter |
V2010-1F11S3S-11CC12 |
| Cover End RPM [Max |
1.5 |
| Displacement Shaft End (cu in/revolution) |
2.2 |
| Cover End Pressure [Max |
N/A |
| Rotation |
N/A |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Port Size |
13 Tooth Splined |
| Shaft Seal Type |
V2010 |
| Shaft Length |
1.3125 in |
| Weight |
Double |
| Minor Diameter [Min |
Buna-N |
| Shaft Key |
2500 |
| Pilot Type |
0.728 in |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Minor Diameter [Max |
3000 |
| Displacement Cover End (cu in/revolution) |
0.6 |
| Mounting |
N/A |
| Shaft Dia. |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
0.873 in |
| Seal Material |
0.872 in |
| Shaft End RPM [Max |
0.734 in |
| Major Diameter [Min |
0.723 in |
| Model No. |
N/A |
| Mounting Flange |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
V2010-1F11S3S-11CC12 |
| Port Type |
2500 |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Major Diameter [Max |
16.5 |
| Spline Description |
N/A |