1727776 172-7776 Excavator Hydraulic Water Pump for D330C Engine 3304 3306
| Cover End RPM [Max: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
6.88 |
| Port Orientation - Shaft End: |
Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End: |
1 1/4 in Flange |
| Model No.: |
3 |
| Pressure Port Size, Cover End: |
1 in Flange |
| Controlled Flow Rate: |
N/A |
| Seal Material: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End RPM [Max |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
6.88 |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Model No. |
3 |
| Pressure Port Size, Cover End |
1 in Flange |
| Controlled Flow Rate |
N/A |
| Seal Material |
Standard Pilot |
| Major Diameter [Min |
1.25 in |
| Spline Description |
14 Tooth Splined |
| Shaft Length |
3525VQ |
| Shaft Seal Type |
1.9375 in |
| Shaft End Pressure [Max |
Buna-N |
| Minor Diameter [Max |
2400 |
| Major Diameter [Max |
1.04 in |
| Weight |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Cover End Pressure [Max |
12/24 |
| Port Orientation - Cover End |
2500 |
| Rotation |
2400 |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Min |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting |
1.248 in |
| Pilot Type |
1.247 in |
| Shaft Key |
N/A |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Minor Diameter |
N/A |
| GPM @ 1,800 rpm, Cover End |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Port Type |
3525VQ35A21-11DD20 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Max. RPM [Max |
3000 |
| Integral Valve Configuration |
31.5 |
| Shaft Dia. |
52.5 |
| Port Size |
w/o Integral Valves |
| Cover End Flow @ RPM |
Outlet 135° CW from Inlet |