PC200-3 Excavator S6D105 diesel engine cooling water pump 6136-62-1100
| Controlled Flow Rate: |
45.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
25.5 |
| Rotation: |
2 1/2 |
| Major Diameter [Max: |
Flange |
| Shaft End Pressure [Max: |
3000 |
| Pilot Type: |
Standard Pilot |
| PDF |
|
Product Details
| Controlled Flow Rate |
45.0 LB |
| Major Diameter [Min |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
25.5 |
| Rotation |
2 1/2 |
| Major Diameter [Max |
Flange |
| Shaft End Pressure [Max |
3000 |
| Pilot Type |
Standard Pilot |
| Manufacturer Part No. |
2520VQ17A5-11DD20 |
| Port Type |
13 Tooth Splined |
| Minor Diameter [Max |
2520VQ |
| Cover End Flow @ RPM |
1.375 in |
| Cover End Pressure [Max |
3000 |
| Shaft Seal Type |
2500 |
| Mounting |
0.715 in |
| Shaft End RPM [Max |
SAE B, 2 Bolt |
| Weight |
Single Shaft Seal |
| Relief Valve Setting |
16/32 |
| Cover End RPM [Max |
2700 |
| Spline Description |
2500 |
| GPM @ 1,800 rpm, Cover End |
7.5 |
| Shaft Key |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Type |
0.873 in |
| Minor Diameter [Min |
0.872 in |
| Shaft End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size |
N/A |
| Model No. |
N/A |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Displacement Shaft End (cu in/revolution) |
3.37 |