Replacement Uchida Rexroth A8V107 Pilot Feed Gear Pump for Excavator
| Max. RPM [Max: |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
31.5 |
| GPM @ 1,800 rpm, Cover End: |
16.5 |
| Pressure Port Size, Shaft End: |
1 in Flange |
| Pressure Port Size, Cover End: |
3/4 in Flange |
| Shaft End Flow @ RPM: |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight: |
N/A |
| Relief Valve Setting: |
N/A |
| PDF |
|
Product Details
| Max. RPM [Max |
45.0 LB |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| GPM @ 1,800 rpm, Cover End |
16.5 |
| Pressure Port Size, Shaft End |
1 in Flange |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Shaft End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight |
N/A |
| Relief Valve Setting |
N/A |
| Cover End Flow @ RPM |
0.875 in |
| Minor Diameter [Min |
13 Tooth Splined |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Integral Valve Configuration |
w/o Integral Valves |
| Cover End Pressure [Max |
3000 |
| Minor Diameter [Max |
0.715 in |
| Shaft End Pressure [Max |
3000 |
| Major Diameter [Max |
Single Shaft Seal |
| Manufacturer Part No. |
2520VQ21A11-11BB20-LH |
| Mounting Flange |
2700 |
| Minor Diameter |
2500 |
| Controlled Flow Rate |
N/A |
| Shaft Seal Type |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Spline Description |
0.873 in |
| Shaft End RPM [Max |
0.872 in |
| Major Diameter [Min |
N/A |
| Cover End RPM [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
2.22 |
| Displacement Shaft End (cu in/revolution) |
4.12 |