6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
| Manufacturer Part No.: |
101.0 LB |
| Shaft End Pressure [Max: |
2500 |
| Pilot Type: |
Right Hand (CW) |
| Shaft Key: |
4525VQ60A17-11BB20 |
| Port Type: |
3 1/2 |
| Cover End RPM [Max: |
Flange |
| Pump Series: |
N/A |
| Rotation: |
Standard Pilot |
| PDF |
|
Product Details
| Manufacturer Part No. |
101.0 LB |
| Shaft End Pressure [Max |
2500 |
| Pilot Type |
Right Hand (CW) |
| Shaft Key |
4525VQ60A17-11BB20 |
| Port Type |
3 1/2 |
| Cover End RPM [Max |
Flange |
| Pump Series |
N/A |
| Rotation |
Standard Pilot |
| Shaft Dia. |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Cover End Pressure [Max |
1.9375 in |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| Controlled Flow Rate |
2200 |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Shaft Type |
SAE C, 2 Bolt |
| Minor Diameter [Max |
Single Shaft Seal |
| Port Size |
12/24 |
| Shaft End Flow @ RPM |
2200 |
| Model No. |
2200 |
| Mounting |
N/A |
| Minor Diameter [Min |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
1.248 in |
| Relief Valve Setting |
1.247 in |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Shaft End RPM [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Weight |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Major Diameter [Min |
4525VQ60A17-11BB20 |
| Pressure Port Size, Cover End |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
90 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |