Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Spline Description: |
45.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| Weight: |
2520VQ14A5-1CC20 |
| GPM @ 1,800 rpm, Shaft End: |
2.5 |
| Integral Valve Configuration: |
Flange |
| Port Orientation - Cover End: |
3/16 in |
| Port Type: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
45.0 LB |
| Max. RPM [Max |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| Weight |
2520VQ14A5-1CC20 |
| GPM @ 1,800 rpm, Shaft End |
2.5 |
| Integral Valve Configuration |
Flange |
| Port Orientation - Cover End |
3/16 in |
| Port Type |
Standard Pilot |
| Minor Diameter |
0.875 in |
| Controlled Flow Rate |
Straight w/ Key |
| Shaft Key |
2520VQ |
| Mounting |
1.9375 in |
| Cover End Pressure [Max |
Double |
| Shaft Dia. |
Buna-N |
| Minor Diameter [Max |
2700 |
| Manufacturer Part No. |
N/A |
| Shaft End Pressure [Max |
SAE B, 2 Bolt |
| Seal Material |
Single Shaft Seal |
| Major Diameter [Max |
N/A |
| Shaft Seal Type |
2700 |
| Cover End Flow @ RPM |
2700 |
| Rotation |
N/A |
| Cover End RPM [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Port Size |
N/A |
| Mounting Flange |
N/A |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pump Series |
2520VQ14A5-1CC20 |
| Relief Valve Setting |
3000 |
| Shaft Type |
3000 |
| Major Diameter [Min |
7.5 |
| Minor Diameter [Min |
21 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Pilot Type |
Outlet 45° CW from Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Displacement Shaft End (cu in/revolution) |
2.8 |