DAIKIN VZ63C23RJBX-10 VZ63 Series Piston Pump
The online 130 mm Da DAIKIN VZ63C23RJBX-10 VZ63 Series Piston Pump parts BEARING OF AMERICA CORP. store gives you immediate access to a selection 110 kN Basic dynamic load rating (C1) of more than 1.4 million new, used, remanufactured.
What is VZ63C23RJBX-10 bearing interchange？
| Brand Name: |
DAIKIN |
| Model Number: |
VZ63C23RJBX-10 |
| Shaft Type: |
45.0 LB |
| Seal Material: |
Flange Mount |
| Max. RPM [Max: |
2500 |
| Model No.: |
2520VQ21A14-11BC20-LH |
| Shaft Length: |
2.5 |
| Pump Series: |
Flange |
| Port Type: |
N/A |
| Port Size: |
Standard Pilot |
Product Details
| Shaft Type |
45.0 LB |
| Seal Material |
Flange Mount |
| Max. RPM [Max |
2500 |
| Model No. |
2520VQ21A14-11BC20-LH |
| Shaft Length |
2.5 |
| Pump Series |
Flange |
| Port Type |
N/A |
| Port Size |
Standard Pilot |
| Rotation |
0.875 in |
| Mounting |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Pilot Type |
1.375 in |
| Weight |
Double |
| Shaft Key |
Buna-N |
| Minor Diameter |
0.715 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Spline Description |
16/32 |
| Cover End RPM [Max |
2700 |
| Shaft End RPM [Max |
2500 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Max |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ21A14-11BC20-LH |
| Cover End Pressure [Max |
2000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
21 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.8 |
| Displacement Shaft End (cu in/revolution) |
4.1 |