4.75 Inch | 120.65 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KD-47 ARO Angular Contact Ball Bearings
What is Felt Seal Seal Type the 4.75 Inch | 120.65 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter best place to buy 4.75 Inch | 120.65 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KD-47 ARO Angular Contact Ball Bearings online? CONSOLIDATED BEARING Manufacturing BEARING OF AMERICA CORP. Service 4 x M12 Bolt Size .
What is KD-47 ARO bearing interchange？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
KD-47 ARO |
| Weight: |
75.0 LB |
| Shaft Type: |
Flange Mount |
| Mounting: |
Left Hand (CCW) |
| Port Orientation - Cover End: |
Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution): |
6.88 |
| Model No.: |
Flange |
| Rotation: |
N/A |
| Port Orientation - Shaft End: |
Outlet Opposite Inlet |
Product Details
| Weight |
75.0 LB |
| Shaft Type |
Flange Mount |
| Mounting |
Left Hand (CCW) |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) |
6.88 |
| Model No. |
Flange |
| Rotation |
N/A |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Shaft Key |
1.25 in |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Displacement Cover End (cu in/revolution) |
2.41 |
| Pilot Type |
1 15/16 in |
| Shaft Dia. |
Buna-N |
| Port Size |
2400 |
| Pump Series |
1.04 in |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Port Type |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End RPM [Max |
2500 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Cover End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3520VQ35A12-11AA20-LH |
| Cover End Pressure [Max |
2300 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
18 |
| GPM @ 1,800 rpm, Shaft End |
52.5 |
| Integral Valve Configuration |
w/o Integral Valves |