CONSOLIDATED BEARING INS 6328 M C/4 Single Row Ball Bearings
Our highly-skilled Mounted Bearing Engineering Group and factory-trained BEARING OF AMERICA CORP. service experts have the resources to help you with all your CONSOLIDATED BEARING INS 6328 M C/4 Single Row Ball Bearings needs 0.0047 in Pre Install Clearance Max - including routine maintenance, major repairs, 97700 lb C - Dynamic Load (Basic) warranty service, and CONSOLIDATED BEARING equipment inspections.
What is INS 6328 M C/4 bearing interchange?
Brand Name: |
CONSOLIDATED BEARING |
Model Number: |
INS 6328 M C/4 |
Port Type: |
118.0 LB |
Port Orientation - Shaft End: |
Outlet Opposite Inlet |
Displacement Cover End (cu in/revolution): |
5.96 |
Pump Series: |
4535VQ60A30-86AA20-LH |
Shaft Key: |
4 |
Weight: |
Flange |
Pressure Port Size, Cover End: |
1 1/4 in Flange |
Displacement Shaft End (cu in/revolution): |
11.8 |
Product Details
Port Type |
118.0 LB |
Port Orientation - Shaft End |
Outlet Opposite Inlet |
Displacement Cover End (cu in/revolution) |
5.96 |
Pump Series |
4535VQ60A30-86AA20-LH |
Shaft Key |
4 |
Weight |
Flange |
Pressure Port Size, Cover End |
1 1/4 in Flange |
Displacement Shaft End (cu in/revolution) |
11.8 |
Rotation |
1.5 in |
Shaft Type |
Straight w/ Key |
Port Orientation - Cover End |
Outlet Opposite Inlet |
Port Size |
2 15/16 in |
Model No. |
Buna-N |
Pressure Port Size, Shaft End |
1 1/2 in Flange |
Mounting |
N/A |
Shaft Dia. |
SAE C, 2 Bolt |
Pilot Type |
Single Shaft Seal |
Spline Description |
N/A |
Cover End RPM [Max |
2200 |
Shaft End RPM [Max |
2200 |
Controlled Flow Rate |
N/A |
Cover End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Major Diameter [Max |
N/A |
Major Diameter [Min |
N/A |
Minor Diameter [Max |
N/A |
Minor Diameter [Min |
N/A |
Relief Valve Setting |
N/A |
Shaft End Flow @ RPM |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Manufacturer Part No. |
4535VQ60A30-86AA20-LH |
Cover End Pressure [Max |
3000 |
Shaft End Pressure [Max |
2500 |
GPM @ 1,800 rpm, Cover End |
45 |
GPM @ 1,800 rpm, Shaft End |
90 |
Integral Valve Configuration |
w/o Integral Valves |