1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter BROWNING CPS-Z220S Pillow Block Bearings
What is the best 1-14 thread size: 2.2500 in stud length: place BEARING OF AMERICA CORP. to buy 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter BROWNING CPS-Z220S Pillow Block Bearings online? BROWNING BEARING Manufacturing Service . 1.25 Inch | 31.75 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.688 Inch | 42.875 Millimeter
What is CPS-Z220S bearing cross reference？
| Brand Name: |
BROWNING |
| Model Number: |
CPS-Z220S |
| Cover End Flow @ RPM: |
45.0 LB |
| Shaft End Pressure [Max: |
3000 |
| Cover End RPM [Max: |
Left Hand (CCW) |
| Integral Valve Configuration: |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution): |
2.41 |
| Shaft Seal Type: |
Flange |
| Minor Diameter [Max: |
N/A |
| Minor Diameter: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
45.0 LB |
| Shaft End Pressure [Max |
3000 |
| Cover End RPM [Max |
Left Hand (CCW) |
| Integral Valve Configuration |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
2.41 |
| Shaft Seal Type |
Flange |
| Minor Diameter [Max |
N/A |
| Minor Diameter |
Standard Pilot |
| Shaft End RPM [Max |
0.875 in |
| Mounting Flange |
13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
18 |
| Relief Valve Setting |
1 3/8 in |
| Major Diameter [Max |
Buna-N |
| Spline Description |
2700 |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Shaft End Flow @ RPM |
SAE B, 2 Bolt |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Manufacturer Part No. |
16/32 |
| Pressure Port Size, Shaft End |
1 in Flange |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Controlled Flow Rate |
N/A |
| Shaft Length |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max |
0.873 in |
| Displacement Shaft End (cu in/revolution) |
2.45 |
| Minor Diameter [Min |
N/A |
| GPM @ 1,800 rpm, Cover End |
18 |
| Seal Material |
N/A |
| Major Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2300 |