AMI UETFT205-16 Flange Block Bearings
With over 10170 full-service 1.00 mm Fillet Radius rb stores, our AMI UETFT205-16 Flange Block Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps BEARING OF AMERICA CORP. you maximize your productivity by saving 2200 rpm Oil Speed Rating n2 time and your hard-earned dollars.
What is UETFT205-16 bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UETFT205-16 |
| Port Type: |
30.0 LB |
| Shaft Dia.: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Controlled Flow Rate: |
V2010-1F7S2S-1DD12 |
| Major Diameter [Max: |
1 1/2 |
| Shaft Seal Type: |
Flange |
| Mounting Flange: |
3/16 in |
| Pump Series: |
N/A |
Product Details
| Port Type |
30.0 LB |
| Shaft Dia. |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Controlled Flow Rate |
V2010-1F7S2S-1DD12 |
| Major Diameter [Max |
1 1/2 |
| Shaft Seal Type |
Flange |
| Mounting Flange |
3/16 in |
| Pump Series |
N/A |
| Minor Diameter |
0.875 in |
| Minor Diameter [Max |
Straight w/ Key |
| Cover End Flow @ RPM |
V2010 |
| Major Diameter [Min |
2.3125 in |
| Weight |
Buna-N |
| Port Size |
3000 |
| Seal Material |
N/A |
| Max. RPM [Max |
SAE B, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Rotation |
N/A |
| Model No. |
3000 |
| Shaft Key |
3000 |
| Spline Description |
N/A |
| Shaft Length |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Pilot Type |
N/A |
| Mounting |
N/A |
| Minor Diameter [Min |
N/A |
| Shaft Type |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
V2010-1F7S2S-1DD12 |
| Cover End Pressure [Max |
2500 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
3 |
| GPM @ 1,800 rpm, Shaft End |
10.5 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.4 |
| Displacement Shaft End (cu in/revolution) |
1.39 |