AMI UEFCS206-18NP Flange Block Bearings
Request A Quote For BEARING OF AMERICA CORP. Your 20000 rpm Oil Speed Rating Open/Shielded n2 Special AMI UEFCS206-18NP Flange Block Bearings Needs 20000 rpm Oil Speed Rating n2 Today! Free AMI Bearing Quotes. 13.00 mm B ISO 9001 certified.
What is UEFCS206-18NP bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UEFCS206-18NP |
| Shaft Type: |
76.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Port Type: |
Left Hand (CCW) |
| Minor Diameter [Min: |
3525VQ38A12-11AA20-LH |
| Model No.: |
3 |
| Minor Diameter [Max: |
Flange |
| Minor Diameter: |
N/A |
| Pump Series: |
Standard Pilot |
Product Details
| Shaft Type |
76.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Port Type |
Left Hand (CCW) |
| Minor Diameter [Min |
3525VQ38A12-11AA20-LH |
| Model No. |
3 |
| Minor Diameter [Max |
Flange |
| Minor Diameter |
N/A |
| Pump Series |
Standard Pilot |
| Shaft Seal Type |
1.25 in |
| Mounting |
14 Tooth Splined |
| Controlled Flow Rate |
3525VQ |
| Rotation |
1 15/16 in |
| Shaft Dia. |
Buna-N |
| Major Diameter [Min |
2400 |
| Seal Material |
1.04 in |
| Port Size |
SAE C, 2 Bolt |
| Weight |
Single Shaft Seal |
| Cover End RPM [Max |
12/24 |
| Cover End Flow @ RPM |
2500 |
| Shaft Key |
2400 |
| Major Diameter [Max |
N/A |
| Pilot Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Length |
1.248 in |
| Max. RPM [Max |
1.247 in |
| Mounting Flange |
N/A |
| Spline Description |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ38A12-11AA20-LH |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
18 |
| GPM @ 1,800 rpm, Shaft End |
57 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
2.45 |
| Displacement Shaft End (cu in/revolution) |
7.42 |