AMI CUCFL212-36C Flange Block Bearings
AMI CUCFL212-36C Flange Block Bearings SEARCH 80 N/mm² Specific dynamic load factor K - Whether it's agriculture or construction equipment your working 0.03 Coefficient of friction µ min. on, Has theAMI Bearing you BEARING OF AMERICA CORP. need.
What is CUCFL212-36C bearing cross reference？
| Brand Name: |
AMI |
| Model Number: |
CUCFL212-36C |
| Weight: |
45.0 LB |
| Minor Diameter: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Major Diameter [Min: |
2520V14A8-11AC22R |
| Seal Material: |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Spline Description: |
N/A |
| Minor Diameter [Max: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Minor Diameter |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Major Diameter [Min |
2520V14A8-11AC22R |
| Seal Material |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Spline Description |
N/A |
| Minor Diameter [Max |
Standard Pilot |
| Model No. |
1.09 in |
| Mounting Flange |
13 Tooth Splined |
| Shaft Length |
2520V |
| Pilot Type |
1 3/4 in |
| Shaft Type |
Buna-N |
| Shaft Seal Type |
1800 |
| Minor Diameter [Min |
0.7285 in |
| Rotation |
SAE B, 2 Bolt |
| Port Type |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Shaft Dia. |
1800 |
| Max. RPM [Max |
1800 |
| Shaft Key |
N/A |
| Major Diameter [Max |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Mounting |
0.873 in |
| Cover End Flow @ RPM |
0.872 in |
| Pump Series |
0.734 in |
| Port Size |
0.723 in |
| Relief Valve Setting |
N/A |
| Shaft End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520V14A8-11AC22R |
| Cover End Pressure [Max |
3000 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
12 |
| GPM @ 1,800 rpm, Shaft End |
21 |
| Integral Valve Configuration |
N/A |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Pressure Port Size, Cover End |
3/4 in Code 61 |
| Pressure Port Size, Shaft End |
1 in Code 61 |
| Displacement Cover End (cu in/revolution) |
1.7 |
| Displacement Shaft End (cu in/revolution) |
2.8 |