AMI UKPX13+HA2313 Pillow Block Bearings
Request 0.51 kN Fatigue load limit Pu A Quote For BEARING OF AMERICA CORP. Your 1.1 mm ra max. Special AMI UKPX13+HA2313 Pillow Block Bearings Needs Today! Free AMI Bearing Quotes. ISO 80 mm D 9001 certified.
What is UKPX13+HA2313 bearing interchange？
| Brand Name: | AMI |
| Model Number: | UKPX13+HA2313 |
| Pilot Type: | 76.0 LB |
| Shaft Type: | Flange Mount |
| Port Size: | Left Hand (CCW) |
| Shaft Dia.: | 3525VQ38A21-11AA20-LH |
| Seal Material: | 3 |
| Mounting Flange: | Flange |
| Port Type: | N/A |
| Shaft Length: | Standard Pilot |
Product Details
| Pilot Type | 76.0 LB |
| Shaft Type | Flange Mount |
| Port Size | Left Hand (CCW) |
| Shaft Dia. | 3525VQ38A21-11AA20-LH |
| Seal Material | 3 |
| Mounting Flange | Flange |
| Port Type | N/A |
| Shaft Length | Standard Pilot |
| Minor Diameter | 1.25 in |
| Cover End Flow @ RPM | 14 Tooth Splined |
| Minor Diameter [Max | 3525VQ |
| Major Diameter [Max | 1.9375 in |
| Pump Series | Double |
| Max. RPM [Max | Buna-N |
| Weight | 2400 |
| Shaft Seal Type | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Major Diameter [Min | 12/24 |
| Shaft End RPM [Max | 2500 |
| Controlled Flow Rate | 2400 |
| Model No. | N/A |
| Rotation | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Key | 1.248 in |
| Mounting | 1.247 in |
| Minor Diameter [Min | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3525VQ38A21-11AA20-LH |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| GPM @ 1,800 rpm, Shaft End | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 4.1 |
| Displacement Shaft End (cu in/revolution) | 7.4 |
