AMI UEFCS206-18NP Flange Block Bearings
Request A Quote For BEARING OF AMERICA CORP. Your 20000 rpm Oil Speed Rating Open/Shielded n2 Special AMI UEFCS206-18NP Flange Block Bearings Needs 20000 rpm Oil Speed Rating n2 Today! Free AMI Bearing Quotes. 13.00 mm B ISO 9001 certified.
What is UEFCS206-18NP bearing interchange？
| Brand Name: | AMI |
| Model Number: | UEFCS206-18NP |
| Shaft Type: | 76.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Port Type: | Left Hand (CCW) |
| Minor Diameter [Min: | 3525VQ38A12-11AA20-LH |
| Model No.: | 3 |
| Minor Diameter [Max: | Flange |
| Minor Diameter: | N/A |
| Pump Series: | Standard Pilot |
Product Details
| Shaft Type | 76.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Port Type | Left Hand (CCW) |
| Minor Diameter [Min | 3525VQ38A12-11AA20-LH |
| Model No. | 3 |
| Minor Diameter [Max | Flange |
| Minor Diameter | N/A |
| Pump Series | Standard Pilot |
| Shaft Seal Type | 1.25 in |
| Mounting | 14 Tooth Splined |
| Controlled Flow Rate | 3525VQ |
| Rotation | 1 15/16 in |
| Shaft Dia. | Buna-N |
| Major Diameter [Min | 2400 |
| Seal Material | 1.04 in |
| Port Size | SAE C, 2 Bolt |
| Weight | Single Shaft Seal |
| Cover End RPM [Max | 12/24 |
| Cover End Flow @ RPM | 2500 |
| Shaft Key | 2400 |
| Major Diameter [Max | N/A |
| Pilot Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Length | 1.248 in |
| Max. RPM [Max | 1.247 in |
| Mounting Flange | N/A |
| Spline Description | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Manufacturer Part No. | 3525VQ38A12-11AA20-LH |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 18 |
| GPM @ 1,800 rpm, Shaft End | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 2.45 |
| Displacement Shaft End (cu in/revolution) | 7.42 |
