AMI UCST207-22NPMZ20 Mounted Units & Inserts
QuestionAMI UCST207-22NPMZ20 Mounted Units & Inserts 36.00 mm B ? Find what you need BEARING OF AMERICA CORP. 2.00 mm Fillet Radius ra faster by entering your AMI Bearing information .
What is UCST207-22NPMZ20 bearing interchange？
| Brand Name: | AMI |
| Model Number: | UCST207-22NPMZ20 |
| Major Diameter [Min: | 45.0 LB |
| Shaft Key: | Flange Mount |
| Model No.: | Left Hand (CCW) |
| Port Size: | 2520VQ21A11-11CA20-LH |
| Max. RPM [Max: | 2 1/2 |
| Mounting: | Flange |
| Minor Diameter [Min: | N/A |
| Minor Diameter [Max: | Standard Pilot |
Product Details
| Major Diameter [Min | 45.0 LB |
| Shaft Key | Flange Mount |
| Model No. | Left Hand (CCW) |
| Port Size | 2520VQ21A11-11CA20-LH |
| Max. RPM [Max | 2 1/2 |
| Mounting | Flange |
| Minor Diameter [Min | N/A |
| Minor Diameter [Max | Standard Pilot |
| Controlled Flow Rate | 0.875 in |
| Shaft Seal Type | 13 Tooth Splined |
| Shaft Length | 2520VQ |
| Shaft End RPM [Max | 1 3/8 in |
| Major Diameter [Max | Buna-N |
| Mounting Flange | 2500 |
| Shaft Type | 0.715 in |
| Weight | SAE B, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Seal Material | 16/32 |
| Cover End Flow @ RPM | 2700 |
| Port Type | 2500 |
| Pilot Type | N/A |
| Cover End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pump Series | 0.873 in |
| Minor Diameter | 0.872 in |
| Rotation | N/A |
| Spline Description | N/A |
| Relief Valve Setting | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 2520VQ21A11-11CA20-LH |
| Cover End Pressure [Max | 3000 |
| Shaft End Pressure [Max | 3000 |
| GPM @ 1,800 rpm, Cover End | 16.5 |
| GPM @ 1,800 rpm, Shaft End | 31.5 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End | Outlet Inline w/Inlet |
| Pressure Port Size, Cover End | 3/4 in Flange |
| Pressure Port Size, Shaft End | 1 in Flange |
| Displacement Cover End (cu in/revolution) | 2.22 |
| Displacement Shaft End (cu in/revolution) | 4.12 |
